Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Mitsubishi OutlanderOil Type & Capacity
OEM spec from the factory service manual for the ES, AWD variant.
Quick Answer
Oil Type
$ILSAC, API - SAE 0W-20
Capacity (w/ Filter)
4.55 QTS.
4.3 L
Variant
ES, AWD
Note: SAE 0W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. If it's not available the ILSAC certification oil of other viscosity grades can be used temporarily.
This vehicle's factory manual
2011 Mitsubishi Outlander: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2011 Mitsubishi Outlander
Maintenance Specs
Frequently Asked Questions
- What type of oil does a 2011 Mitsubishi Outlander take?
- The 2011 Mitsubishi Outlander requires ILSAC, API - SAE 0W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the ES, AWD configuration.
- How much oil does a 2011 Mitsubishi Outlander need?
- The 2011 Mitsubishi Outlander takes 4.55 QTS. (4.3 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Mitsubishi Outlander?
- Yes — synthetic oil that meets the ILSAC, API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Mitsubishi Outlander?
- Using oil that does not meet the ILSAC, API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.