Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Mazda Mx-5Coolant Type & Capacity
OEM spec from the factory service manual for the Grand Touring, Automatic variant.
Quick Answer
Coolant Type
FL22 Type Engine Coolant
Capacity
7.60 QTS.
7.19 L
Variant
Grand Touring, Automatic
Note: If the "FL22" mark is shown on or near the cooling system cap, use Mazda Genuine FL22 engine coolant. FL22 type engine coolant is shipped as a diluted solution. Use the solution as is when replacing coolant.
This vehicle's factory manual
2011 Mazda Mx-5: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2011 Mazda Mx-5
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2011 Mazda Mx-5 take?
- The 2011 Mazda Mx-5 requires FL22 Type Engine Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Grand Touring, Automatic configuration.
- How much coolant does a 2011 Mazda Mx-5 hold?
- The 2011 Mazda Mx-5 cooling system capacity is 7.60 QTS. (7.19 L).
- Can I use universal coolant in my 2011 Mazda Mx-5?
- It is strongly recommended to use coolant that meets the FL22 Type Engine Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2011 Mazda Mx-5?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.