Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Mazda Cx-9Coolant Type & Capacity
OEM spec from the factory service manual for the Grand Touring, 3.7 A, AWD variant.
Quick Answer
Coolant Type
FL22 Type Engine Coolant
Capacity
12.20 QTS.
11.54 L
Variant
Grand Touring, 3.7 A, AWD
Note: If the "FL22" mark is shown on or near the cooling system cap, use Mazda Genuine FL22 engine coolant. FL22 type engine coolant is shipped as a diluted solution. Use the solution as is when replacing coolant.
This vehicle's factory manual
2011 Mazda Cx-9: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2011 Mazda Cx-9
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2011 Mazda Cx-9 take?
- The 2011 Mazda Cx-9 requires FL22 Type Engine Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Grand Touring, 3.7 A, AWD configuration.
- How much coolant does a 2011 Mazda Cx-9 hold?
- The 2011 Mazda Cx-9 cooling system capacity is 12.20 QTS. (11.54 L).
- Can I use universal coolant in my 2011 Mazda Cx-9?
- It is strongly recommended to use coolant that meets the FL22 Type Engine Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2011 Mazda Cx-9?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.