Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Mazda 2Coolant Type & Capacity
OEM spec from the factory service manual for the Sport, 1.5 Y, Automatic variant.
Quick Answer
Coolant Type
FL22 Type Engine Coolant
Capacity
5.70 QTS.
5.39 L
Variant
Sport, 1.5 Y, Automatic
Note: If the "FL22" mark is shown on or near the cooling system cap, use Mazda Genuine FL22 engine coolant. FL22 type engine coolant is shipped as a diluted solution. Use the solution as is when replacing coolant.
This vehicle's factory manual
2011 Mazda 2: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2011 Mazda 2
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2011 Mazda 2 take?
- The 2011 Mazda 2 requires FL22 Type Engine Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Sport, 1.5 Y, Automatic configuration.
- How much coolant does a 2011 Mazda 2 hold?
- The 2011 Mazda 2 cooling system capacity is 5.70 QTS. (5.39 L).
- Can I use universal coolant in my 2011 Mazda 2?
- It is strongly recommended to use coolant that meets the FL22 Type Engine Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2011 Mazda 2?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.