Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Lexus RxOil Type & Capacity
OEM spec from the factory service manual for the AWD variant.
Quick Answer
Oil Type
$API - SAE 0W-20
Capacity (w/ Filter)
6.40 QTS.
6.05 L
Variant
AWD
Note: SAE 0W-20 Synthetic Oil is the oil that provides the optimal level of fuel efficiency.
This vehicle's factory manual
2011 Lexus Rx: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2011 Lexus Rx
Quick Actions
Frequently Asked Questions
- What type of oil does a 2011 Lexus Rx take?
- The 2011 Lexus Rx requires API - SAE 0W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the AWD configuration.
- How much oil does a 2011 Lexus Rx need?
- The 2011 Lexus Rx takes 6.40 QTS. (6.05 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Lexus Rx?
- Yes — synthetic oil that meets the API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Lexus Rx?
- Using oil that does not meet the API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.