Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Land Rover Lr2Coolant Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Coolant Type
50/50 mixture of CASTROL SF Antifreeze and Water
Capacity
6.85 QTS.
6.48 L
Variant
Base
Note: Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable.
This vehicle's factory manual
The coolant spec is above. This opens the fluids section of the 2011 Land Rover Lr2 Base factory book.
Other specs:All specs
What You'll Need
Related for Your 2011 Land Rover Lr2
Frequently Asked Questions
- What type of coolant does a 2011 Land Rover Lr2 take?
- The 2011 Land Rover Lr2 requires 50/50 mixture of CASTROL SF Antifreeze and Water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much coolant does a 2011 Land Rover Lr2 hold?
- The 2011 Land Rover Lr2 cooling system capacity is 6.85 QTS. (6.48 L).
- Can I use universal coolant in my 2011 Land Rover Lr2?
- It is strongly recommended to use coolant that meets the 50/50 mixture of CASTROL SF Antifreeze and Water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2011 Land Rover Lr2?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.