Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Jeep PatriotOil Type & Capacity
OEM spec from the factory service manual for the Latitude, 2.0 A, Automatic CVT variant.
Quick Answer
Oil Type
$API - SAE 5W-20
Capacity (w/ Filter)
4.50 QTS.
4.25 L
Variant
Latitude, 2.0 A, Automatic CVT
Note: Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Refer to your engine oil filler cap for correct SAE grade.
This vehicle's factory manual
2011 Jeep Patriot: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2011 Jeep Patriot
Maintenance Specs
Frequently Asked Questions
- What type of oil does a 2011 Jeep Patriot take?
- The 2011 Jeep Patriot requires API - SAE 5W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Latitude, 2.0 A, Automatic CVT configuration.
- How much oil does a 2011 Jeep Patriot need?
- The 2011 Jeep Patriot takes 4.50 QTS. (4.25 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Jeep Patriot?
- Yes — synthetic oil that meets the API - SAE 5W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Jeep Patriot?
- Using oil that does not meet the API - SAE 5W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.