Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Honda FitOil Type & Capacity
OEM spec from the factory service manual for the Base, Automatic variant.
Quick Answer
Oil Type
$API - SAE 0W-20 Detergent Oil
Capacity (w/ Filter)
3.80 QTS.
3.59 L
Variant
Base, Automatic
Note: Excluding the oil remaining in the engine.
You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight.
This vehicle's factory manual
2011 Honda Fit: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2011 Honda Fit
Frequently Asked Questions
- What type of oil does a 2011 Honda Fit take?
- The 2011 Honda Fit requires API - SAE 0W-20 Detergent Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, Automatic configuration.
- How much oil does a 2011 Honda Fit need?
- The 2011 Honda Fit takes 3.80 QTS. (3.59 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Honda Fit?
- Yes — synthetic oil that meets the API - SAE 0W-20 Detergent Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Honda Fit?
- Using oil that does not meet the API - SAE 0W-20 Detergent Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.