Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Honda Cr-zCoolant Type & Capacity
OEM spec from the factory service manual for the Base, Automatic CVT variant.
Quick Answer
Coolant Type
HONDA Long-life Antifreeze/Coolant Type 2
Capacity
4.64 QTS.
4.39 L
Variant
Base, Automatic CVT
Note: This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water.
Change including the remaining 0.46 qt. in the reserve tank.
This vehicle's factory manual
2011 Honda Cr-z: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2011 Honda Cr-z
Frequently Asked Questions
- What type of coolant does a 2011 Honda Cr-z take?
- The 2011 Honda Cr-z requires HONDA Long-life Antifreeze/Coolant Type 2. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, Automatic CVT configuration.
- How much coolant does a 2011 Honda Cr-z hold?
- The 2011 Honda Cr-z cooling system capacity is 4.64 QTS. (4.39 L).
- Can I use universal coolant in my 2011 Honda Cr-z?
- It is strongly recommended to use coolant that meets the HONDA Long-life Antifreeze/Coolant Type 2 specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2011 Honda Cr-z?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.