Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Honda CivicOil Type & Capacity
OEM spec from the factory service manual for the DX, 2D Coupe, Automatic variant.
Quick Answer
Oil Type
$API - SAE 5W-20
Capacity (w/ Filter)
3.90 QTS.
3.69 L
Variant
DX, 2D Coupe, Automatic
Note: Excluding the oil remaining in the engine.
You may use a SAE 10W-30 oil if the temperature in your area never goes below 20Deg.F (-7Deg.C).
You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight.
This vehicle's factory manual
2011 Honda Civic: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specsCoolantTire SizeBatteryBeltSpark PlugsTrans FluidHeadlightsBrake FluidCapacities
What You'll Need
Related for Your 2011 Honda Civic
Frequently Asked Questions
- What type of oil does a 2011 Honda Civic take?
- The 2011 Honda Civic requires API - SAE 5W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the DX, 2D Coupe, Automatic configuration.
- How much oil does a 2011 Honda Civic need?
- The 2011 Honda Civic takes 3.90 QTS. (3.69 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Honda Civic?
- Yes — synthetic oil that meets the API - SAE 5W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Honda Civic?
- Using oil that does not meet the API - SAE 5W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.