Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford EdgeCoolant Type & Capacity
OEM spec from the factory service manual for the Limited, AWD variant.
Quick Answer
Coolant Type
MOTORCRAFT Specialty Green Engine Coolant (dark green-colored). MOTORCRAFT Specialty Orange Engine Coolant (US)
Capacity
11.70 QTS.
11.07 L
Variant
Limited, AWD
Note: Add the coolant type originally equipped in the vehicle.
Indicates only approximate dry fill capacity. Some applications may vary.
This vehicle's factory manual
2011 Ford Edge: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Engine Coolant / Antifreeze
MOTORCRAFT Specialty Green Engine Coolant (dark green-colored). MOTORCRAFT Specialty Orange Engine Coolant (US) for Ford Edge
Search Amazon β
Tool
Spill-Free Coolant Funnel
Search Amazon β
Tester
Coolant Tester / Hydrometer
Search Amazon β
Drain Pan
Coolant Drain Pan
Search Amazon β
Related for Your 2011 Ford Edge
Frequently Asked Questions
- What type of coolant does a 2011 Ford Edge take?
- The 2011 Ford Edge requires MOTORCRAFT Specialty Green Engine Coolant (dark green-colored). MOTORCRAFT Specialty Orange Engine Coolant (US). The exact spec may vary slightly by engine variant β this page shows the OEM recommendation for the Limited, AWD configuration.
- How much coolant does a 2011 Ford Edge hold?
- The 2011 Ford Edge cooling system capacity is 11.70 QTS. (11.07 L).
- Can I use universal coolant in my 2011 Ford Edge?
- It is strongly recommended to use coolant that meets the MOTORCRAFT Specialty Green Engine Coolant (dark green-colored). MOTORCRAFT Specialty Orange Engine Coolant (US) specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2011 Ford Edge?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.
