2011 Ford EconolineOil Type & Capacity

OEM spec from the factory service manual for the E150, Van Cargo Extended, 4.6 W, 4R70E variant.

Quick Answer

Oil Type

$MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent

Capacity (w/ Filter)

6.00 QTS.

5.67 L

Variant

E150, Van Cargo Extended, 4.6 W, 4R70E

Note: Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark.

This vehicle's factory manual

2011 Ford Econoline: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.
Other specs:All specs

Related for Your 2011 Ford Econoline

Frequently Asked Questions

What type of oil does a 2011 Ford Econoline take?
The 2011 Ford Econoline requires MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the E150, Van Cargo Extended, 4.6 W, 4R70E configuration.
How much oil does a 2011 Ford Econoline need?
The 2011 Ford Econoline takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2011 Ford Econoline?
Yes β€” synthetic oil that meets the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2011 Ford Econoline?
Using oil that does not meet the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.