2011 Dodge DurangoCoolant Type & Capacity

OEM spec from the factory service manual for the Citadel, 3.6 G, AWD variant.

Quick Answer

Coolant Type

MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent

Capacity

11.40 QTS.

10.78 L

Variant

Citadel, 3.6 G, AWD

Note: Includes: heater and coolant recovery tank filled to "max" level. DO NOT mix different types or colors of engine coolant.

This vehicle's factory manual

The coolant spec is above. This opens the fluids section of the 2011 Dodge Durango Citadel, 3.6 G, AWD factory book.

Open the 2011 Dodge manual

Related for Your 2011 Dodge Durango

Frequently Asked Questions

What type of coolant does a 2011 Dodge Durango take?
The 2011 Dodge Durango requires MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Citadel, 3.6 G, AWD configuration.
How much coolant does a 2011 Dodge Durango hold?
The 2011 Dodge Durango cooling system capacity is 11.40 QTS. (10.78 L).
Can I use universal coolant in my 2011 Dodge Durango?
It is strongly recommended to use coolant that meets the MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 2011 Dodge Durango?
Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.