Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Chrysler 300Oil Type & Capacity
OEM spec from the factory service manual for the Base, Gas variant.
Quick Answer
Oil Type
$API - SAE 5W-30
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
Base, Gas
Note: For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2011 Chrysler 300 Base, Gas factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2011 Chrysler 300
Frequently Asked Questions
- What type of oil does a 2011 Chrysler 300 take?
- The 2011 Chrysler 300 requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, Gas configuration.
- How much oil does a 2011 Chrysler 300 need?
- The 2011 Chrysler 300 takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Chrysler 300?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Chrysler 300?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.