Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Audi A3Oil Type & Capacity
OEM spec from the factory service manual for the 2.0 TDI variant.
Quick Answer
Oil Type
$SAE 0W-30 VW 508 00
Capacity (w/ Filter)
4.20 QTS.
3.97 L
Variant
2.0 TDI
Note: Refer to Audi's Engine Oil Overwiew chart: Specialty Engine Oils. Version 7 -/21/2021.
This vehicle's factory manual
2011 Audi A3: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2011 Audi A3
Quick Actions
Frequently Asked Questions
- What type of oil does a 2011 Audi A3 take?
- The 2011 Audi A3 requires SAE 0W-30 VW 508 00. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2.0 TDI configuration.
- How much oil does a 2011 Audi A3 need?
- The 2011 Audi A3 takes 4.20 QTS. (3.97 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Audi A3?
- Yes — synthetic oil that meets the SAE 0W-30 VW 508 00 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Audi A3?
- Using oil that does not meet the SAE 0W-30 VW 508 00 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.