Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Audi A3Coolant Type & Capacity
OEM spec from the factory service manual for the 2.0 TDI variant.
Quick Answer
Coolant Type
See manual
Capacity
9.20 QTS.
8.7 L
Variant
2.0 TDI
Note: Part No. G 012 A8G.
This vehicle's factory manual
2011 Audi A3: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2011 Audi A3
Maintenance Specs
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2011 Audi A3 take?
- The 2011 Audi A3 uses an OEM-specified coolant. Refer to the factory service manual for the exact type, as it varies by engine variant.
- How much coolant does a 2011 Audi A3 hold?
- The 2011 Audi A3 cooling system capacity is 9.20 QTS. (8.7 L).
- Can I use universal coolant in my 2011 Audi A3?
- Always use coolant that meets the OEM specification for your engine. Universal coolants may not provide adequate corrosion protection.
- What happens if I use the wrong coolant in my 2011 Audi A3?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.