Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Saturn VueCoolant Type & Capacity
OEM spec from the factory service manual for the XE, 2.4 1 variant.
Quick Answer
Coolant Type
50/50 mixture of DEX-COOL and clean, drinkable water
Capacity
9.00 QTS.
8.51 L
Variant
XE, 2.4 1
This vehicle's factory manual
2010 Saturn Vue: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2010 Saturn Vue
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2010 Saturn Vue take?
- The 2010 Saturn Vue requires 50/50 mixture of DEX-COOL and clean, drinkable water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the XE, 2.4 1 configuration.
- How much coolant does a 2010 Saturn Vue hold?
- The 2010 Saturn Vue cooling system capacity is 9.00 QTS. (8.51 L).
- Can I use universal coolant in my 2010 Saturn Vue?
- It is strongly recommended to use coolant that meets the 50/50 mixture of DEX-COOL and clean, drinkable water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2010 Saturn Vue?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.