Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Mazda 5Coolant Type & Capacity
OEM spec from the factory service manual for the Grand Touring, 2.3 3 variant.
Quick Answer
Coolant Type
FL22 Type Engine Coolant
Capacity
7.90 QTS.
7.47 L
Variant
Grand Touring, 2.3 3
Note: Use FL22 Engine Coolant only if the "FL22" mark is shown on or near the cooling system cap.
This vehicle's factory manual
2010 Mazda 5: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2010 Mazda 5
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2010 Mazda 5 take?
- The 2010 Mazda 5 requires FL22 Type Engine Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Grand Touring, 2.3 3 configuration.
- How much coolant does a 2010 Mazda 5 hold?
- The 2010 Mazda 5 cooling system capacity is 7.90 QTS. (7.47 L).
- Can I use universal coolant in my 2010 Mazda 5?
- It is strongly recommended to use coolant that meets the FL22 Type Engine Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2010 Mazda 5?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.