Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Ford PickupCoolant Type & Capacity
OEM spec from the factory service manual for the F150, 2D Pickup, 4.6 8, 4WD variant.
Quick Answer
Coolant Type
FORD Premium Gold Engine Coolant w/bittering agent
Capacity
15.50 QTS.
14.66 L
Variant
F150, 2D Pickup, 4.6 8, 4WD
Note: Add the coolant type originally equipped in the vehicle.
This vehicle's factory manual
2010 Ford Pickup: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2010 Ford Pickup
Frequently Asked Questions
- What type of coolant does a 2010 Ford Pickup take?
- The 2010 Ford Pickup requires FORD Premium Gold Engine Coolant w/bittering agent. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the F150, 2D Pickup, 4.6 8, 4WD configuration.
- How much coolant does a 2010 Ford Pickup hold?
- The 2010 Ford Pickup cooling system capacity is 15.50 QTS. (14.66 L).
- Can I use universal coolant in my 2010 Ford Pickup?
- It is strongly recommended to use coolant that meets the FORD Premium Gold Engine Coolant w/bittering agent specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2010 Ford Pickup?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.