Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Ford FocusOil Type & Capacity
OEM spec from the factory service manual for the S, Automatic variant.
Quick Answer
Oil Type
MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent
Capacity (w/ Filter)
4.50 QTS.
4.25 L
Variant
S, Automatic
Note: Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark.
Source: Factory service manual — 2010 Ford Focus S, Automatic. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2010 Ford Focus take?
- The 2010 Ford Focus requires MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the S, Automatic configuration.
- How much oil does a 2010 Ford Focus need?
- The 2010 Ford Focus takes 4.50 QTS. (4.25 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2010 Ford Focus?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2010 Ford Focus?
- Using oil that does not meet the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil, or equivalent specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.