Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Ford FocusCoolant Type & Capacity
OEM spec from the factory service manual for the S, Automatic variant.
Quick Answer
Coolant Type
FORD Premium Gold Engine Coolant w/bittering agent
Capacity
5.30 QTS.
5.01 L
Variant
S, Automatic
Note: Add the coolant type originally equipped in the vehicle.
Source: Factory service manual — 2010 Ford Focus S, Automatic. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2010 Ford Focus take?
- The 2010 Ford Focus requires FORD Premium Gold Engine Coolant w/bittering agent. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the S, Automatic configuration.
- How much coolant does a 2010 Ford Focus hold?
- The 2010 Ford Focus cooling system capacity is 5.30 QTS. (5.01 L).
- Can I use universal coolant in my 2010 Ford Focus?
- It is strongly recommended to use coolant that meets the FORD Premium Gold Engine Coolant w/bittering agent specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2010 Ford Focus?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.