Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Dodge ViperOil Type & Capacity
OEM spec from the factory service manual for the SRT-10 ACR variant.
Quick Answer
Oil Type
$Pennzoil Platinum European Formula SAE 5W-40 or equivalent.
Capacity (w/ Filter)
11.00 QTS.
10.4 L
Variant
SRT-10 ACR
Note: For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF.
This vehicle's factory manual
2010 Dodge Viper: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2010 Dodge Viper
Frequently Asked Questions
- What type of oil does a 2010 Dodge Viper take?
- The 2010 Dodge Viper requires Pennzoil Platinum European Formula SAE 5W-40 or equivalent.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SRT-10 ACR configuration.
- How much oil does a 2010 Dodge Viper need?
- The 2010 Dodge Viper takes 11.00 QTS. (10.4 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2010 Dodge Viper?
- Yes — synthetic oil that meets the Pennzoil Platinum European Formula SAE 5W-40 or equivalent. specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2010 Dodge Viper?
- Using oil that does not meet the Pennzoil Platinum European Formula SAE 5W-40 or equivalent. specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.