Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Chevrolet AvalancheOil Type & Capacity
OEM spec from the factory service manual for the 4WD variant.
Quick Answer
Oil Type
$API - SAE 5W-30
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
4WD
Note: Use oil that meets GM Standard GM6094M.
For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
This vehicle's factory manual
2010 Chevrolet Avalanche: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2010 Chevrolet Avalanche
Frequently Asked Questions
- What type of oil does a 2010 Chevrolet Avalanche take?
- The 2010 Chevrolet Avalanche requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 4WD configuration.
- How much oil does a 2010 Chevrolet Avalanche need?
- The 2010 Chevrolet Avalanche takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2010 Chevrolet Avalanche?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2010 Chevrolet Avalanche?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.