Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 BMW M5Oil Type & Capacity
OEM spec from the factory service manual for the GS653BZ variant.
Quick Answer
Oil Type
CASTROL TWS Motorsport SAE 10W-60 Synthetic, or CASTROL Formula RS 10W-60 Synthetic Oil
Capacity (w/ Filter)
N/A
N/A
Variant
GS653BZ
Note: Start with 8.45 qts. Run until full operating temp is reached then check and top off. Never overfill above the MAX mark.
If unable to obtain the recommended oil, use BMW High Performance Synthetic Oil or MOBIL 1, use a synthetic oil with API rating of SH or higher.
Source: Factory service manual — 2010 BMW M5 GS653BZ. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2010 BMW M5 take?
- The 2010 BMW M5 requires CASTROL TWS Motorsport SAE 10W-60 Synthetic, or CASTROL Formula RS 10W-60 Synthetic Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the GS653BZ configuration.
- How much oil does a 2010 BMW M5 need?
- The 2010 BMW M5 takes N/A (N/A) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2010 BMW M5?
- Yes — synthetic oil that meets the CASTROL TWS Motorsport SAE 10W-60 Synthetic, or CASTROL Formula RS 10W-60 Synthetic Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2010 BMW M5?
- Using oil that does not meet the CASTROL TWS Motorsport SAE 10W-60 Synthetic, or CASTROL Formula RS 10W-60 Synthetic Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.