Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Audi A8Coolant Type & Capacity
OEM spec from the factory service manual for the L Quattro variant.
Quick Answer
Coolant Type
Coolant additive G12++
Capacity
12.70 QTS.
12.01 L
Variant
L Quattro
Note: The cooling system has been filled at the factory with permanent coolant which DOES NOT need to be changed.
Even in an emergency, if the coolant additive G12++. G12+ or G12 is not available, do not use a different additive. Use plain water instead until you get the correct additive and can restore the correct ratio. This should be done as soon as possible.
This vehicle's factory manual
2010 Audi A8: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2010 Audi A8
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2010 Audi A8 take?
- The 2010 Audi A8 requires Coolant additive G12++. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the L Quattro configuration.
- How much coolant does a 2010 Audi A8 hold?
- The 2010 Audi A8 cooling system capacity is 12.70 QTS. (12.01 L).
- Can I use universal coolant in my 2010 Audi A8?
- It is strongly recommended to use coolant that meets the Coolant additive G12++ specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2010 Audi A8?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.