Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Audi A4Coolant Type & Capacity
OEM spec from the factory service manual for the 2.0T variant.
Quick Answer
Coolant Type
Coolant additive G12++
Capacity
7.40 QTS.
7 L
Variant
2.0T
Note: The cooling system has been filled at the factory with permanent coolant which DOES NOT need to be changed.
Even in an emergency, if the coolant additive G12++. G12+ or G12 is not available, do not use a different additive. Use plain water instead until you get the correct additive and can restore the correct ratio. This should be done as soon as possible.
Source: Factory service manual — 2010 Audi A4 2.0T. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2010 Audi A4 take?
- The 2010 Audi A4 requires Coolant additive G12++. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2.0T configuration.
- How much coolant does a 2010 Audi A4 hold?
- The 2010 Audi A4 cooling system capacity is 7.40 QTS. (7 L).
- Can I use universal coolant in my 2010 Audi A4?
- It is strongly recommended to use coolant that meets the Coolant additive G12++ specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2010 Audi A4?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.