Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Subaru TribecaOil Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Oil Type
$API - SM or SL, SAE 5W-30
Capacity (w/ Filter)
6.70 QTS.
6.34 L
Variant
Base
Note: In hot weather oil of higher viscosity is required to properly lubricate the engine.
This vehicle's factory manual
2009 Subaru Tribeca: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2009 Subaru Tribeca
Frequently Asked Questions
- What type of oil does a 2009 Subaru Tribeca take?
- The 2009 Subaru Tribeca requires API - SM or SL, SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much oil does a 2009 Subaru Tribeca need?
- The 2009 Subaru Tribeca takes 6.70 QTS. (6.34 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2009 Subaru Tribeca?
- Yes — synthetic oil that meets the API - SM or SL, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2009 Subaru Tribeca?
- Using oil that does not meet the API - SM or SL, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.