Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Mazda Rx-8Coolant Type & Capacity
OEM spec from the factory service manual for the Grand Touring, 1.3 2 variant.
Quick Answer
Coolant Type
See manual
Capacity
10.00 QTS.
9.46 L
Variant
Grand Touring, 1.3 2
Note: FL22 type engine coolant concentration is factory adjusted. Use the product as it is without diluting it. Except FL22 type engine coolant: Above 3Deg.F use: 35% Antifreeze solution and 65% demineralized water, above -15Deg.F use: 45% Antifreeze solution and 55% demineralized water, above -40Deg.F use: 55% Antifreeze solution and 45% demineralized water.
This vehicle's factory manual
2009 Mazda Rx-8: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2009 Mazda Rx-8
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2009 Mazda Rx-8 take?
- The 2009 Mazda Rx-8 uses an OEM-specified coolant. Refer to the factory service manual for the exact type, as it varies by engine variant.
- How much coolant does a 2009 Mazda Rx-8 hold?
- The 2009 Mazda Rx-8 cooling system capacity is 10.00 QTS. (9.46 L).
- Can I use universal coolant in my 2009 Mazda Rx-8?
- Always use coolant that meets the OEM specification for your engine. Universal coolants may not provide adequate corrosion protection.
- What happens if I use the wrong coolant in my 2009 Mazda Rx-8?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.