Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Lexus RXOil Type & Capacity
OEM spec from the factory service manual for the AWD variant.
Quick Answer
Oil Type
API - SAE 5W-30
Capacity (w/ Filter)
6.40 QTS.
6.05 L
Variant
AWD
Note: 5W oils are for areas where the ambient temperature is -13Deg.F (-25Deg.C) or above. 10W oils are for areas where ambient temperature is -4Deg.F (-20Deg.C) or above. Oils with smaller figures are better for engine starting in cold weather and fuel efficiency.
Source: Factory service manual — 2009 Lexus RX AWD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2009 Lexus RX take?
- The 2009 Lexus RX requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the AWD configuration.
- How much oil does a 2009 Lexus RX need?
- The 2009 Lexus RX takes 6.40 QTS. (6.05 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2009 Lexus RX?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2009 Lexus RX?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.