Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Ford FlexOil Type & Capacity
OEM spec from the factory service manual for the Limited, AWD variant.
Quick Answer
Oil Type
$SAE 5W-20 Premium Synthetic Blend Motor Oil
Capacity (w/ Filter)
5.50 QTS.
5.2 L
Variant
Limited, AWD
Note: Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of FORD specification WSS-M2C929-A or WSS-M2C930-A and the API Certification mark.
This vehicle's factory manual
2009 Ford Flex: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2009 Ford Flex
Frequently Asked Questions
- What type of oil does a 2009 Ford Flex take?
- The 2009 Ford Flex requires SAE 5W-20 Premium Synthetic Blend Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, AWD configuration.
- How much oil does a 2009 Ford Flex need?
- The 2009 Ford Flex takes 5.50 QTS. (5.2 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2009 Ford Flex?
- Yes — synthetic oil that meets the SAE 5W-20 Premium Synthetic Blend Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2009 Ford Flex?
- Using oil that does not meet the SAE 5W-20 Premium Synthetic Blend Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.