Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Dodge SprinterCoolant Type & Capacity
OEM spec from the factory service manual for the 2500, Van Cargo variant.
Quick Answer
Coolant Type
MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent
Capacity
10.75 QTS.
10.17 L
Variant
2500, Van Cargo
This vehicle's factory manual
2009 Dodge Sprinter: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Engine Coolant / Antifreeze
MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent for Dodge Sprinter
Search Amazon →
Tool
Spill-Free Coolant Funnel
Search Amazon →
Tester
Coolant Tester / Hydrometer
Search Amazon →
Drain Pan
Coolant Drain Pan
Search Amazon →
Related for Your 2009 Dodge Sprinter
Frequently Asked Questions
- What type of coolant does a 2009 Dodge Sprinter take?
- The 2009 Dodge Sprinter requires MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2500, Van Cargo configuration.
- How much coolant does a 2009 Dodge Sprinter hold?
- The 2009 Dodge Sprinter cooling system capacity is 10.75 QTS. (10.17 L).
- Can I use universal coolant in my 2009 Dodge Sprinter?
- It is strongly recommended to use coolant that meets the MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2009 Dodge Sprinter?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.