Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Volvo S60Coolant Type & Capacity
OEM spec from the factory service manual for the Base, AWD variant.
Quick Answer
Coolant Type
50/50 mixture of VOLVO Antifreeze/Coolant and water
Capacity
9.30 QTS.
8.8 L
Variant
Base, AWD
This vehicle's factory manual
2008 Volvo S60: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2008 Volvo S60
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2008 Volvo S60 take?
- The 2008 Volvo S60 requires 50/50 mixture of VOLVO Antifreeze/Coolant and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, AWD configuration.
- How much coolant does a 2008 Volvo S60 hold?
- The 2008 Volvo S60 cooling system capacity is 9.30 QTS. (8.8 L).
- Can I use universal coolant in my 2008 Volvo S60?
- It is strongly recommended to use coolant that meets the 50/50 mixture of VOLVO Antifreeze/Coolant and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2008 Volvo S60?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.