2008 Volvo C30Oil Type & Capacity

OEM spec from the factory service manual for the T-5 R-Design, Automatic variant.

Quick Answer

Oil Type

ILSAC, GF-3, API - SL, or ACEA A1/B1, SAE 5W-30

Capacity (w/ Filter)

6.10 QTS.

5.77 L

Variant

T-5 R-Design, Automatic

Note: When temperatures exceed 86Deg.F (30Deg.C) VOLVO recommends SAE 5W-40 or 0W-40. Under normal use when temperatures DO NOT exceed 86Deg.F (30Deg.C), SAE 5W-30 will provide good fuel economy and engine protection. Synthetic oils meeting SAE 0W-30 or 0W-40 and complying with oil quality requirements are recommended for driving in areas of sustained temperatures extreme (hot or cold), when towing a trailer over long distances, and for prolonged driving in mountainous areas.
Source: Factory service manual β€” 2008 Volvo C30 T-5 R-Design, Automatic. View full manual section β†’

Frequently Asked Questions

What type of oil does a 2008 Volvo C30 take?
The 2008 Volvo C30 requires ILSAC, GF-3, API - SL, or ACEA A1/B1, SAE 5W-30. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the T-5 R-Design, Automatic configuration.
How much oil does a 2008 Volvo C30 need?
The 2008 Volvo C30 takes 6.10 QTS. (5.77 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2008 Volvo C30?
Yes β€” synthetic oil that meets the ILSAC, GF-3, API - SL, or ACEA A1/B1, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2008 Volvo C30?
Using oil that does not meet the ILSAC, GF-3, API - SL, or ACEA A1/B1, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.