Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Nissan RogueCoolant Type & Capacity
OEM spec from the factory service manual for the S, AWD variant.
Quick Answer
Coolant Type
50/50 mixture of Genuine NISSAN Long Life Antifreeze/Coolant and demineralized or distilled water
Capacity
7.75 QTS.
7.33 L
Variant
S, AWD
This vehicle's factory manual
2008 Nissan Rogue: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2008 Nissan Rogue
Maintenance Specs
Frequently Asked Questions
- What type of coolant does a 2008 Nissan Rogue take?
- The 2008 Nissan Rogue requires 50/50 mixture of Genuine NISSAN Long Life Antifreeze/Coolant and demineralized or distilled water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the S, AWD configuration.
- How much coolant does a 2008 Nissan Rogue hold?
- The 2008 Nissan Rogue cooling system capacity is 7.75 QTS. (7.33 L).
- Can I use universal coolant in my 2008 Nissan Rogue?
- It is strongly recommended to use coolant that meets the 50/50 mixture of Genuine NISSAN Long Life Antifreeze/Coolant and demineralized or distilled water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2008 Nissan Rogue?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.