Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Chrysler CrossfireOil Type & Capacity
OEM spec from the factory service manual for the 2D Convertible, Automatic variant.
Quick Answer
Oil Type
API - SAE 0W-40 Synthetic
Capacity (w/ Filter)
8.50 QTS.
8.04 L
Variant
2D Convertible, Automatic
Note: Only use synthetic engine oils, approved to MB 229.3 or MB 229.5.
Source: Factory service manual — 2008 Chrysler Crossfire 2D Convertible, Automatic. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2008 Chrysler Crossfire take?
- The 2008 Chrysler Crossfire requires API - SAE 0W-40 Synthetic. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2D Convertible, Automatic configuration.
- How much oil does a 2008 Chrysler Crossfire need?
- The 2008 Chrysler Crossfire takes 8.50 QTS. (8.04 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2008 Chrysler Crossfire?
- Yes — synthetic oil that meets the API - SAE 0W-40 Synthetic specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2008 Chrysler Crossfire?
- Using oil that does not meet the API - SAE 0W-40 Synthetic specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.