Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Cadillac EscaladeCoolant Type & Capacity
OEM spec from the factory service manual for the AWD variant.
Quick Answer
Coolant Type
50/50 mixture of DEX-COOL and clean drinkable water
Capacity
17.60 QTS.
16.65 L
Variant
AWD
Note: Add 2.1 qts. if equipped with rear heater.
All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
This vehicle's factory manual
2008 Cadillac Escalade: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2008 Cadillac Escalade
Maintenance Specs
Frequently Asked Questions
- What type of coolant does a 2008 Cadillac Escalade take?
- The 2008 Cadillac Escalade requires 50/50 mixture of DEX-COOL and clean drinkable water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the AWD configuration.
- How much coolant does a 2008 Cadillac Escalade hold?
- The 2008 Cadillac Escalade cooling system capacity is 17.60 QTS. (16.65 L).
- Can I use universal coolant in my 2008 Cadillac Escalade?
- It is strongly recommended to use coolant that meets the 50/50 mixture of DEX-COOL and clean drinkable water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2008 Cadillac Escalade?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.