Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Infiniti FX35Oil Type & Capacity
OEM spec from the factory service manual for the AWD variant.
Quick Answer
Oil Type
API - SG/SH Energy Conserving I and II or API - SJ or SL, Energy Conserving, ILSAC GF-I, GF-II and GF-III, SAE 5W-30
Capacity (w/ Filter)
5.00 QTS.
4.73 L
Variant
AWD
Note: API - SAE 5W-30 is preferred for all ambient temperatures. SAE 10W-30, 10W-40 may be used if the ambient temperature is above 0Deg.F (-18Deg.C).
Source: Factory service manual — 2006 Infiniti FX35 AWD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2006 Infiniti FX35 take?
- The 2006 Infiniti FX35 requires API - SG/SH Energy Conserving I and II or API - SJ or SL, Energy Conserving, ILSAC GF-I, GF-II and GF-III, SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the AWD configuration.
- How much oil does a 2006 Infiniti FX35 need?
- The 2006 Infiniti FX35 takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2006 Infiniti FX35?
- Yes — synthetic oil that meets the API - SG/SH Energy Conserving I and II or API - SJ or SL, Energy Conserving, ILSAC GF-I, GF-II and GF-III, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2006 Infiniti FX35?
- Using oil that does not meet the API - SG/SH Energy Conserving I and II or API - SJ or SL, Energy Conserving, ILSAC GF-I, GF-II and GF-III, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.