Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Infiniti FX35Coolant Type & Capacity
OEM spec from the factory service manual for the AWD variant.
Quick Answer
Coolant Type
50/50 mixture of NISSAN Long Life Antifreeze/Coolant or equivalent and demineralized or distilled water
Capacity
9.10 QTS.
8.61 L
Variant
AWD
Source: Factory service manual — 2006 Infiniti FX35 AWD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2006 Infiniti FX35 take?
- The 2006 Infiniti FX35 requires 50/50 mixture of NISSAN Long Life Antifreeze/Coolant or equivalent and demineralized or distilled water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the AWD configuration.
- How much coolant does a 2006 Infiniti FX35 hold?
- The 2006 Infiniti FX35 cooling system capacity is 9.10 QTS. (8.61 L).
- Can I use universal coolant in my 2006 Infiniti FX35?
- It is strongly recommended to use coolant that meets the 50/50 mixture of NISSAN Long Life Antifreeze/Coolant or equivalent and demineralized or distilled water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2006 Infiniti FX35?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.