Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Chrysler PacificaOil Type & Capacity
OEM spec from the factory service manual for the Base, 3.5 4, AWD variant.
Quick Answer
Oil Type
API - SAE 10W-30
Capacity (w/ Filter)
5.50 QTS.
5.2 L
Variant
Base, 3.5 4, AWD
Note: API - SAE 5W-30 engine oil is allowed during cold weather only to improve cold weather starting.
Source: Factory service manual — 2006 Chrysler Pacifica Base, 3.5 4, AWD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2006 Chrysler Pacifica take?
- The 2006 Chrysler Pacifica requires API - SAE 10W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 3.5 4, AWD configuration.
- How much oil does a 2006 Chrysler Pacifica need?
- The 2006 Chrysler Pacifica takes 5.50 QTS. (5.2 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2006 Chrysler Pacifica?
- Yes — synthetic oil that meets the API - SAE 10W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2006 Chrysler Pacifica?
- Using oil that does not meet the API - SAE 10W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.