Where is this data from?

Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.

Can I use universal coolant in a Mazda 3?

Factory manuals specify exact coolant chemistry for the Mazda 3. Using the wrong coolant type can cause corrosion, overheating, or gasket damage. Always match the OEM specification exactly â€” do not mix incompatible coolant types.

❄️Coolant Type

Mazda 3 Coolant Type

Factory manual coolant type & capacity for the Mazda 3. Exact specs extracted from the LEMON service manual archive.

Last updated: 2026-11-01 â€¢ Reading time: 8 min â€¢ By AllOEMManuals Editorial Team

Quick Answer

2021 Mazda 3 coolant: 7.00 QTS. (6.62 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant..

Generation	Years	Top spec
2021	2021	7.00 QTS. (6.62 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.
2017	2017	6.90 QTS. (6.52 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.
2016	2016	7.30 QTS. (6.9 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Structured Spec Sheet // Mazda 3 Coolant Type

Quick Answer:2021 Mazda 3 coolant: 7.00 QTS. (6.62 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant..

Engine Coolant (2.5 L Eng, Automatic Trans, Normally Aspirated) (2021):7.00 QTS. (6.62 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Automatic Transmission Fluid (2.5 L Eng, Normally Aspirated) (2021):8.30 QTS. (7.85 L) — MAZDA Genuine ATF FZ

Brake Fluid (2021):— SAE J1703 FMVSS116 DOT 3

Differential Gear Oil (2021):0.37 QTS. (0.35 L) — MAZDA Long Life Hypoid Gear Oil SG1

Engine Oil (2.5 L Eng, Normally Aspirated) (2021):4.80 QTS. (4.54 L) — API - ILSAC GF-V or higher SAE 0W-20 Engine Oil

Fuel Tank ( A W D) (2021):12.70 GALS. (48.07 L)

Transfer Case Fluid (2021):0.37 QTS. (0.35 L) — MAZDA Long Life Hypoid Gear Oil SG1

Windshield Washer Fluid (2021):— Ultra-Clear Windshield Washer Fluid

Fuel Tank ( F W D) (2021):13.20 GALS. (49.96 L)

Engine Coolant (2.0 L Eng, Automatic Trans) (2017):6.90 QTS. (6.52 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Refrigerant (2017):1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid (2017):8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid (2017):— SAE J1703 FMVSS116 DOT 3

Clutch Fluid (2017):— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0 L Eng) (2017):4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2017):13.20 GALS. (49.96 L)

Manual Transmission Fluid (2.0 L Eng) (2017):1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Windshield Washer Fluid (2017):— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2.5 L Eng, Automatic Trans) (2017):7.20 QTS. (6.81 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Oil (2.5 L Eng) (2017):4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Manual Transmission Fluid (2.5 L Eng) (2017):1.74 QTS. (1.64 L) — API - GL-4, SAE 75W-80

Engine Coolant (2.5 L Eng, Standard Trans) (2017):6.90 QTS. (6.52 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.0 L Eng, Standard Trans) (2017):6.60 QTS. (6.24 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.0 L Eng, Automatic Trans) (2016):7.30 QTS. (6.9 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Compressor Oil (2016):4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant (2016):1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid (2016):8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid (2016):— SAE J1703 FMVSS116 DOT 3

Clutch Fluid (2016):— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0 L Eng) (2016):4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2016):13.20 GALS. (49.96 L)

Manual Transmission Fluid (2.0 L Eng) (2016):1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Windshield Washer Fluid (2016):— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2.0 L Eng, Standard Trans) (2016):7.10 QTS. (6.71 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.5 L Eng, Automatic Trans) (2016):7.10 QTS. (6.71 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Oil (2.5 L Eng) (2016):4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Manual Transmission Fluid (2.5 L Eng) (2016):1.74 QTS. (1.64 L) — API - GL-4, SAE 75W-80

Engine Coolant (2.5 L Eng, Standard Trans) (2016):6.90 QTS. (6.52 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.0 L Eng, Automatic Trans) (2015):7.30 QTS. (6.9 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Compressor Oil (2015):4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant (2015):1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid (2015):8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid (2015):— SAE J1703 FMVSS116 DOT 3

Clutch Fluid (2015):— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0 L Eng) (2015):4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2015):13.20 GALS. (49.96 L)

Manual Transmission Fluid (2015):1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Power Steering Fluid (2015):— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid (2015):— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2.0 L Eng, Standard Trans) (2015):7.10 QTS. (6.71 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.5 L Eng, Automatic Trans) (2015):7.10 QTS. (6.71 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Oil (2.5 L Eng) (2015):4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Engine Coolant (2.5 L Eng, Standard Trans) (2015):6.90 QTS. (6.52 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.0 L Eng, Automatic Trans) (2014):6.90 QTS. (6.52 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Compressor Oil (2014):4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant (2014):1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid (2014):8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid (2014):— SAE J1703 FMVSS116 DOT 3

Clutch Fluid (2014):— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0 L Eng) (2014):4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2014):13.20 GALS. (49.96 L)

Manual Transmission Fluid (2014):1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Power Steering Fluid (2014):— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid (2014):— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2.0 L Eng, Standard Trans) (2014):6.70 QTS. (6.34 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.5 L Eng) (2014):7.20 QTS. (6.81 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Oil (2.5 L Eng) (2014):4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Engine Coolant (2012):7.90 QTS. (7.47 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Compressor Oil (2012):4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant (2012):1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid (5 Spd Trans) (2012):8.60 QTS. (8.13 L) — Mazda Genuine ATF M-V

Brake Fluid (2012):— SAE J1703 FMVSS116 DOT 3

Clutch Fluid (2012):— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.5 L Eng) (2012):5.30 QTS. (5.01 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2.5 L Eng) (2012):15.90 GALS. (60.18 L)

Manual Transmission Fluid (2.5 L Eng) (2012):3.01 QTS. (2.84 L) — API - GL-4, SAE 75W-80

Power Steering Fluid (2012):— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid (2012):— Ultra-Clear Windshield Washer Fluid

Automatic Transmission Fluid (6 Spd Trans) (2012):8.20 QTS. (7.76 L) — Mazda Genuine ATF F-Z

Engine Coolant (2011):7.90 QTS. (7.47 L) — FL22 Type Engine Coolant Note: If the "FL22" mark is shown on or near the cooling system cap, use Mazda Genuine FL22 engine coolant. FL22 type engine coolant is shipped as a diluted solution. Use the solution as is when replacing coolant.

Air Cond Compressor Oil (2011):4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant (2011):1.10 LBS. (0.49 KG) — R-134a

Automatic Transmission Fluid (2011):8.60 QTS. (8.13 L) — MAZDA Genuine ATF M-V

Brake Fluid (2011):— DOT 3 Brake Fluid

Engine Oil (2.5 L Eng) (2011):5.30 QTS. (5.01 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2.5 L Eng) (2011):15.90 GALS. (60.18 L)

Manual Transmission Fluid (2.5 L Eng) (2011):3.01 QTS. (2.84 L) — API - GL-4 or GL-5: SAE 75W-90. Above 50Deg. F (10Deg. C): API - GL-4 or GL-5 SAE 80W-90

Power Steering Fluid (2011):— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid (2011):— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2010):7.90 QTS. (7.47 L) — FL22 Type Engine Coolant Note: Use FL22 Engine Coolant only if the "FL22" mark is shown on or near the cooling system cap.

Air Cond Compressor Oil (2010):4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant (2010):1.10 LBS. (0.49 KG) — R-134a

Automatic Transmission Fluid (2010):8.60 QTS. (8.13 L) — MAZDA Genuine ATF M-V

Brake Fluid (2010):— DOT 3 Brake Fluid

Engine Oil (2.5 L Eng) (2010):5.30 QTS. (5.01 L) — API - ILSAC, SAE 5W-20 Engine Oil

Fuel Tank (2.5 L Eng) (2010):15.90 GALS. (60.18 L)

Manual Transmission Fluid (5 Spd Trans) (2010):2.93 QTS. (2.77 L) — API - GL-4 or GL-5: SAE 75W-90. Above 50Deg. F (10Deg. C): API - GL-4 or GL-5 SAE 80W-90

Power Steering Fluid (2010):— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid (2010):— Ultra-Clear Windshield Washer Fluid

Manual Transmission Fluid (6 Spd Trans) (2010):3.01 QTS. (2.84 L) — API - GL-4 or GL-5: SAE 75W-90. Above 50Deg. F (10Deg. C): API - GL-4 or GL-5 SAE 80W-90

This vehicle's factory manual

Mazda 3: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Mazda 3 maintenance schedule

Factory Manual ConfirmationCoolant Type

Know the exact coolant type job for your Mazda 3

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Exact Vehicle Check

The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.

Open the 2021 factory manual Different engine or trim

Open the factory manual above to confirm the exact engine before ordering parts.

2021

2021Open 2021 manual

Engine Coolant (2.5L Eng,Automatic Trans,Normally Aspirated)7.00 QTS. (6.62 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Automatic Transmission Fluid (2.5L Eng,Normally Aspirated)8.30 QTS. (7.85 L) — MAZDA Genuine ATF FZ

Brake Fluid— SAE J1703 FMVSS116 DOT 3

Differential Gear Oil0.37 QTS. (0.35 L) — MAZDA Long Life Hypoid Gear Oil SG1

Engine Oil (2.5L Eng,Normally Aspirated)4.80 QTS. (4.54 L) — API - ILSAC GF-V or higher SAE 0W-20 Engine Oil

Fuel Tank (AWD)12.70 GALS. (48.07 L)

Transfer Case Fluid0.37 QTS. (0.35 L) — MAZDA Long Life Hypoid Gear Oil SG1

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Fuel Tank (FWD)13.20 GALS. (49.96 L)

Shop Exact Match on Amazon â†’Full Repair Guide â†’

2017

2017Open 2017 manual

Engine Coolant (2.0L Eng,Automatic Trans)6.90 QTS. (6.52 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Refrigerant1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid— SAE J1703 FMVSS116 DOT 3

Clutch Fluid— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0L Eng)4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank13.20 GALS. (49.96 L)

Manual Transmission Fluid (2.0L Eng)1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2.5L Eng,Automatic Trans)7.20 QTS. (6.81 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Oil (2.5L Eng)4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Manual Transmission Fluid (2.5L Eng)1.74 QTS. (1.64 L) — API - GL-4, SAE 75W-80

Engine Coolant (2.5L Eng,Standard Trans)6.90 QTS. (6.52 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.0L Eng,Standard Trans)6.60 QTS. (6.24 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Shop Exact Match on Amazon â†’Full Repair Guide â†’

2016

2016Open 2016 manual

Engine Coolant (2.0L Eng,Automatic Trans)7.30 QTS. (6.9 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Compressor Oil4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid— SAE J1703 FMVSS116 DOT 3

Clutch Fluid— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0L Eng)4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank13.20 GALS. (49.96 L)

Manual Transmission Fluid (2.0L Eng)1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2.0L Eng,Standard Trans)7.10 QTS. (6.71 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.5L Eng,Automatic Trans)7.10 QTS. (6.71 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Oil (2.5L Eng)4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Manual Transmission Fluid (2.5L Eng)1.74 QTS. (1.64 L) — API - GL-4, SAE 75W-80

Shop Exact Match on Amazon â†’Full Repair Guide â†’

2015

2015Open 2015 manual

Air Cond Compressor Oil4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid— SAE J1703 FMVSS116 DOT 3

Clutch Fluid— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0L Eng)4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank13.20 GALS. (49.96 L)

Manual Transmission Fluid1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Power Steering Fluid— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Engine Oil (2.5L Eng)4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Shop Exact Match on Amazon â†’Full Repair Guide â†’

2014

2014Open 2014 manual

Engine Coolant (2.0L Eng,Automatic Trans)6.90 QTS. (6.52 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Compressor Oil4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid8.20 QTS. (7.76 L) — MAZDA Genuine ATF FZ

Brake Fluid— SAE J1703 FMVSS116 DOT 3

Clutch Fluid— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.0L Eng)4.40 QTS. (4.16 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank13.20 GALS. (49.96 L)

Manual Transmission Fluid1.80 QTS. (1.7 L) — API - GL-4, SAE 75W-80

Power Steering Fluid— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Engine Coolant (2.0L Eng,Standard Trans)6.70 QTS. (6.34 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Coolant (2.5L Eng)7.20 QTS. (6.81 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Engine Oil (2.5L Eng)4.80 QTS. (4.54 L) — API - ILSAC, SAE 0W-20 Engine Oil

Shop Exact Match on Amazon â†’Full Repair Guide â†’

2012

2012Open 2012 manual

Engine Coolant7.90 QTS. (7.47 L) Note: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.

Air Cond Compressor Oil4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant1.06 LBS. (0.48 KG) — HFC-134a (R-134a)

Automatic Transmission Fluid (5 Spd Trans)8.60 QTS. (8.13 L) — Mazda Genuine ATF M-V

Brake Fluid— SAE J1703 FMVSS116 DOT 3

Clutch Fluid— SAE J1703 FMVSS116 DOT 3

Engine Oil (2.5L Eng)5.30 QTS. (5.01 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2.5L Eng)15.90 GALS. (60.18 L)

Manual Transmission Fluid (2.5L Eng)3.01 QTS. (2.84 L) — API - GL-4, SAE 75W-80

Power Steering Fluid— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Automatic Transmission Fluid (6 Spd Trans)8.20 QTS. (7.76 L) — Mazda Genuine ATF F-Z

Shop Exact Match on Amazon â†’Full Repair Guide â†’

2011

2011Open 2011 manual

Engine Coolant7.90 QTS. (7.47 L) — FL22 Type Engine Coolant Note: If the "FL22" mark is shown on or near the cooling system cap, use Mazda Genuine FL22 engine coolant. FL22 type engine coolant is shipped as a diluted solution. Use the solution as is when replacing coolant.

Air Cond Compressor Oil4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant1.10 LBS. (0.49 KG) — R-134a

Automatic Transmission Fluid8.60 QTS. (8.13 L) — MAZDA Genuine ATF M-V

Brake Fluid— DOT 3 Brake Fluid

Engine Oil (2.5L Eng)5.30 QTS. (5.01 L) — API - ILSAC, SAE 0W-20 Engine Oil

Fuel Tank (2.5L Eng)15.90 GALS. (60.18 L)

Manual Transmission Fluid (2.5L Eng)3.01 QTS. (2.84 L) — API - GL-4 or GL-5: SAE 75W-90. Above 50Deg. F (10Deg. C): API - GL-4 or GL-5 SAE 80W-90

Power Steering Fluid— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Shop Exact Match on Amazon â†’Full Repair Guide â†’

2010

2010Open 2010 manual

Engine Coolant7.90 QTS. (7.47 L) — FL22 Type Engine Coolant Note: Use FL22 Engine Coolant only if the "FL22" mark is shown on or near the cooling system cap.

Air Cond Compressor Oil4.00 OZS. (0.11 L) — PAG 46

Air Cond Refrigerant1.10 LBS. (0.49 KG) — R-134a

Automatic Transmission Fluid8.60 QTS. (8.13 L) — MAZDA Genuine ATF M-V

Brake Fluid— DOT 3 Brake Fluid

Engine Oil (2.5L Eng)5.30 QTS. (5.01 L) — API - ILSAC, SAE 5W-20 Engine Oil

Fuel Tank (2.5L Eng)15.90 GALS. (60.18 L)

Manual Transmission Fluid (5 Spd Trans)2.93 QTS. (2.77 L) — API - GL-4 or GL-5: SAE 75W-90. Above 50Deg. F (10Deg. C): API - GL-4 or GL-5 SAE 80W-90

Power Steering Fluid— MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II)

Windshield Washer Fluid— Ultra-Clear Windshield Washer Fluid

Manual Transmission Fluid (6 Spd Trans)3.01 QTS. (2.84 L) — API - GL-4 or GL-5: SAE 75W-90. Above 50Deg. F (10Deg. C): API - GL-4 or GL-5 SAE 80W-90

Shop Exact Match on Amazon â†’Full Repair Guide â†’

Parts and supplies

These links search for related products. Check your year, engine, specification, and fitment with the seller before ordering.

Search for parts

Check fitment

Mazda 3 coolant

Confirm the specification and fitment for your exact vehicle before ordering.

Shop Exact Match on Amazon Search PartsGeek →

Related supplies to consider

Spill-Free Funnel

Without it, you trap air in the heater core and get intermittent heat.

Confirm fit on AmazonGet Item

Distilled Water

Tap water has minerals that corrode aluminum radiators. Always use distilled.

Confirm fit on AmazonGet Item

We earn a small commission if you buy through these links — at zero extra cost to you. These are search results, not verified vehicle-specific recommendations.

Coolant Service — Manual's Parts List

Flush or top-off — here is exactly what you need.

Vehicle-Scoped Amazon Search

Opens Amazon with Mazda 3 prefilled so you can confirm fitment and avoid wrong parts.

Shop Exact Match on Amazon

1
Engine Coolant
7.00 QTS. (6.62 L) Note: Check — verify concentrate vs pre-mixed
Shop →
2
Distilled Water
If using concentrate — never use tap water
Shop →
3
Spill-Free Funnel
Bleeds air from the heater core automatically
Shop →
4
Hose Clamp Pliers
Spring clamps are a pain without these
Shop →
5
Shop Rags
Coolant is slippery — clean spills immediately
Shop →

Get everything at once

Search results vary; confirm each item and its fitment before buying.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

❄️

Shop →

Engine Coolant / Antifreeze

Match the color/spec (e.g. OAT, HOAT) to your car.

🪣

Shop →

Spill-Free Funnel

The best way to bleed air from the cooling system.

🌡️

Shop →

Coolant Tester

Check the freeze and boil protection level.

🔧

Shop →

Hose Clamp Pliers

Helps move spring clamps without mangling hoses.

🧻

Shop →

Shop Towels

Cleanup gear for coolant drips and burps.

🧰

View All →

Project Essentials

Basic tool sets, gloves, and cleaning supplies for your Mazda 3 so the job is ready when the parts arrive.

Frequently Asked Questions

What coolant does the Mazda 3 use?: 2021 Mazda 3 requires 7.00 QTS. (6.62 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant. per the factory manual.
Where is this data from?: Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
What coolant type does a Mazda 3 use?: 2021 Mazda 3 coolant: 7.00 QTS. (6.62 L) Note: Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant..
Can I use universal coolant in a Mazda 3?: Factory manuals specify exact coolant chemistry for the Mazda 3. Using the wrong coolant type can cause corrosion, overheating, or gasket damage. Always match the OEM specification exactly â€” do not mix incompatible coolant types.

Find your service manual

Select your vehicle and check the available manual sections for your exact configuration.

Find a service manual Review a repair estimate Start a diagnosis

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-11-01

Need a full step-by-step repair guide?

Start Free AI Diagnosis â†’

100% Free â€” No signup required

Mazda 3 Coolant Type

Quick Answer

This vehicle's factory manual

Know the exact coolant type job for your Mazda 3

Exact Vehicle Check

2021

2017

2016

2015

2014

2012

2011

2010

Parts and supplies

Mazda 3 coolant

Spill-Free Funnel

Distilled Water

Coolant Service — Manual's Parts List

One-Trip Shopping List

Engine Coolant / Antifreeze

Spill-Free Funnel

Coolant Tester

Hose Clamp Pliers

Shop Towels

Project Essentials

Frequently Asked Questions

Mazda 3 Repair Guides

More Mazda 3 Guides

Find your service manual

Author & Review