Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Kia SedonaCoolant Type & Capacity
OEM spec from the factory service manual for the EX variant.
Quick Answer
Coolant Type
(5Deg.F) 35/65% , (-13Deg.F) 40/60%, (-31Deg.F) 50/50%, (-49Deg.F) 60/40% mixture of Ethylene Glycol Antifreeze and water
Capacity
8.20 QTS.
7.76 L
Variant
EX
This vehicle's factory manual
2005 Kia Sedona: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Engine Coolant / Antifreeze
(5Deg.F) 35/65% , (-13Deg.F) 40/60%, (-31Deg.F) 50/50%, (-49Deg.F) 60/40% mixture of Ethylene Glycol Antifreeze and water for Kia Sedona
Search Amazon →
Tool
Spill-Free Coolant Funnel
Search Amazon →
Tester
Coolant Tester / Hydrometer
Search Amazon →
Drain Pan
Coolant Drain Pan
Search Amazon →
Related for Your 2005 Kia Sedona
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2005 Kia Sedona take?
- The 2005 Kia Sedona requires (5Deg.F) 35/65% , (-13Deg.F) 40/60%, (-31Deg.F) 50/50%, (-49Deg.F) 60/40% mixture of Ethylene Glycol Antifreeze and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the EX configuration.
- How much coolant does a 2005 Kia Sedona hold?
- The 2005 Kia Sedona cooling system capacity is 8.20 QTS. (7.76 L).
- Can I use universal coolant in my 2005 Kia Sedona?
- It is strongly recommended to use coolant that meets the (5Deg.F) 35/65% , (-13Deg.F) 40/60%, (-31Deg.F) 50/50%, (-49Deg.F) 60/40% mixture of Ethylene Glycol Antifreeze and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2005 Kia Sedona?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.