Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Dodge NeonCoolant Type & Capacity
OEM spec from the factory service manual for the SE, Automatic variant.
Quick Answer
Coolant Type
MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent
Capacity
6.50 QTS.
6.15 L
Variant
SE, Automatic
Note: Includes: heater and coolant recovery tank filled to "max" level.
This vehicle's factory manual
2005 Dodge Neon: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Engine Coolant / Antifreeze
MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent for Dodge Neon
Search Amazon β
Tool
Spill-Free Coolant Funnel
Search Amazon β
Tester
Coolant Tester / Hydrometer
Search Amazon β
Drain Pan
Coolant Drain Pan
Search Amazon β
Related for Your 2005 Dodge Neon
Frequently Asked Questions
- What type of coolant does a 2005 Dodge Neon take?
- The 2005 Dodge Neon requires MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. The exact spec may vary slightly by engine variant β this page shows the OEM recommendation for the SE, Automatic configuration.
- How much coolant does a 2005 Dodge Neon hold?
- The 2005 Dodge Neon cooling system capacity is 6.50 QTS. (6.15 L).
- Can I use universal coolant in my 2005 Dodge Neon?
- It is strongly recommended to use coolant that meets the MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2005 Dodge Neon?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.
