2004 Volvo V40Oil Type & Capacity

OEM spec from the factory service manual for the Base variant.

Quick Answer

Oil Type

$API - SAE 5W-30

Capacity (w/ Filter)

5.70 QTS.

5.39 L

Variant

Base

Note: When temperatures exceed 86Deg.F (30Deg.C) VOLVO recommends SAE 10W-30. Under normal use when temperatures DO NOT exceed 86Deg.F (30Deg.C), SAE 5W-30 will provide good fuel economy and engine protection. Synthetic oils meeting SAE 10W-30 and complying with quality requirements are recommended for driving in areas of sustained temperatures extremes (hot or cold), when towing a trailer over long distances, and for prolonged driving in mountainous areas.

This vehicle's factory manual

2004 Volvo V40: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.
Other specs:All specs

Related for Your 2004 Volvo V40

Frequently Asked Questions

What type of oil does a 2004 Volvo V40 take?
The 2004 Volvo V40 requires API - SAE 5W-30. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Base configuration.
How much oil does a 2004 Volvo V40 need?
The 2004 Volvo V40 takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2004 Volvo V40?
Yes β€” synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2004 Volvo V40?
Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.