2004 Porsche 911Oil Type & Capacity

OEM spec from the factory service manual for the Turbo, 2D Convertible, Automatic variant.

Quick Answer

Oil Type

$MOBIL1. API - SAE 0W-40, 5W-40, 5W-50 Above -13Deg.F (-25Deg.C), SAE 0W-40 Below -13Deg.F (-25Deg.C)

Capacity (w/ Filter)

9.25 QTS.

8.75 L

Variant

Turbo, 2D Convertible, Automatic

Note: Manufacturer's approved fluid only.

This vehicle's factory manual

2004 Porsche 911: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs

What You'll Need

Engine Oil

$MOBIL1. API - SAE 0W-40, 5W-40, 5W-50 Above -13Deg.F (-25Deg.C), SAE 0W-40 Below -13Deg.F (-25Deg.C) for Porsche 911

Search Amazon →

Oil Filter

Porsche 911 Oil Filter

Search Amazon →

Tool

Oil Filter Wrench

Search Amazon →

Kit

Funnel + Drain Pan Kit

Search Amazon →

Related for Your 2004 Porsche 911

Quick Actions

🏠2004 Porsche 911 Hub🛠️All Repair Guides🤖AI Diagnosis

Frequently Asked Questions

What type of oil does a 2004 Porsche 911 take?
The 2004 Porsche 911 requires MOBIL1. API - SAE 0W-40, 5W-40, 5W-50 Above -13Deg.F (-25Deg.C), SAE 0W-40 Below -13Deg.F (-25Deg.C). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Turbo, 2D Convertible, Automatic configuration.
How much oil does a 2004 Porsche 911 need?
The 2004 Porsche 911 takes 9.25 QTS. (8.75 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2004 Porsche 911?
Yes — synthetic oil that meets the MOBIL1. API - SAE 0W-40, 5W-40, 5W-50 Above -13Deg.F (-25Deg.C), SAE 0W-40 Below -13Deg.F (-25Deg.C) specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2004 Porsche 911?
Using oil that does not meet the MOBIL1. API - SAE 0W-40, 5W-40, 5W-50 Above -13Deg.F (-25Deg.C), SAE 0W-40 Below -13Deg.F (-25Deg.C) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.