Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Jaguar Xk8Coolant Type & Capacity
OEM spec from the factory service manual for the 2D Convertible variant.
Quick Answer
Coolant Type
50/50 mixture of water, JAGUAR Antifreeze/Coolant and Corrosion Inhibitor
Capacity
10.00 QTS.
9.46 L
Variant
2D Convertible
Note: Specification: WSS M97B44-D.
This vehicle's factory manual
The coolant spec is above. This opens the fluids section of the 2003 Jaguar Xk8 2D Convertible factory book.
Other specs:All specs
What You'll Need
Related for Your 2003 Jaguar Xk8
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2003 Jaguar Xk8 take?
- The 2003 Jaguar Xk8 requires 50/50 mixture of water, JAGUAR Antifreeze/Coolant and Corrosion Inhibitor. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2D Convertible configuration.
- How much coolant does a 2003 Jaguar Xk8 hold?
- The 2003 Jaguar Xk8 cooling system capacity is 10.00 QTS. (9.46 L).
- Can I use universal coolant in my 2003 Jaguar Xk8?
- It is strongly recommended to use coolant that meets the 50/50 mixture of water, JAGUAR Antifreeze/Coolant and Corrosion Inhibitor specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2003 Jaguar Xk8?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.