BMW Z4 Fluid Capacities
Factory manual fluid capacities for the BMW Z4. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-11-01 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2020-2024 BMW Z4: 1.22 LBS. (0.55 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 Note: The nameplate in the engine compartment indicates which refrigerant has been used.
| Generation | Years | Top spec |
|---|---|---|
| 2020-2024 | 2020-2024 | 1.22 LBS. (0.55 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 Note: The nameplate in the engine compartment indicates which refrigerant has been used. |
| 2019 | 2019 | 1.22 LBS. (0.55 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 Note: The nameplate in the engine compartment indicates which refrigerant has been used. |
| 2016 | 2016 | — PAG 46 Note: See Underhood Decal. |
This vehicle's factory manual
BMW Z4: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Know the exact fluid capacities job for your BMW Z4
2020-2024 BMW Z4: 1.22 LBS. (0.55 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 Note: The nameplate in the engine compartment indicates which refrigerant has been used.
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2020-2024
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →The automatic transmissions have a extended oil filling. These transmissions require no oil change for their entire service life. The approved lifetime fluid must be used after repairs on the transmission or transmission oil cooler. The lifetime oil must not be mixed with or replaced by other types of automatic transmission fluid as this will cause transmission failure.
2019
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →The automatic transmissions have a extended oil filling. These transmissions require no oil change for their entire service life. The approved lifetime fluid must be used after repairs on the transmission or transmission oil cooler. The lifetime oil must not be mixed with or replaced by other types of automatic transmission fluid as this will cause transmission failure.
- →The oil reservoirs for hydraulic fluid are marked on the rim of the reservoir to show which type of oil grade can be used. ATF oil or Pentosin CHF oil.
2016
- →See Underhood Decal.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.
- →All vehicles equipped with a manual transmission and the N52, N54 engines require the MTFLT-3 long-term fluid. Refer to label on Transmission, if label is missing enter VIN number in EPC to acquire a new label with fluid description. MTF-LT-3 BMW P/N 22 0 409 878. No oil change required for the entire service life of these transmissions.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
2015
- →See Underhood Decal.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →The choice of the right SAE grade is based on the climatic conditions in the region in which the vehicle is normally driven. BMW recommends BMW High Performance 5W-30 Synthetic Oil (BMW part number 07 51 0 017 866) for regular scheduled engine oil changes.
- →All vehicles equipped with a manual transmission and the N52, N54 engines require the MTFLT-3 long-term fluid. Refer to label on Transmission, if label is missing enter VIN number in EPC to acquire a new label with fluid description. MTF-LT-3 BMW P/N 22 0 409 878. No oil change required for the entire service life of these transmissions.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Parts and supplies
These links search for related products. Check your year, engine, specification, and fitment with the seller before ordering.
BMW Z4 Fluid Service Kit
Confirm the specification and fitment for your exact vehicle before ordering.
We earn a small commission if you buy through these links — at zero extra cost to you. These are search results, not verified vehicle-specific recommendations.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
Search results vary; confirm each item and its fitment before buying.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your BMW Z4 so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What fluid capacities does a BMW Z4 use?
- 2020-2024 BMW Z4: 1.22 LBS. (0.55 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 Note: The nameplate in the engine compartment indicates which refrigerant has been used.
- Why do fluid capacities vary by generation for the BMW Z4?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Find your service manual
Select your vehicle and check the available manual sections for your exact configuration.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-11-01
