Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Acura IntegraCoolant Type & Capacity
OEM spec from the factory service manual for the GS, 2D Coupe, Automatic variant.
Quick Answer
Coolant Type
50/50 mixture of HONDA Antifreeze/Coolant and water
Capacity
1.24 GALS.
4.69 L
Variant
GS, 2D Coupe, Automatic
Source: Factory service manual — 2000 Acura Integra GS, 2D Coupe, Automatic. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2000 Acura Integra take?
- The 2000 Acura Integra requires 50/50 mixture of HONDA Antifreeze/Coolant and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the GS, 2D Coupe, Automatic configuration.
- How much coolant does a 2000 Acura Integra hold?
- The 2000 Acura Integra cooling system capacity is 1.24 GALS. (4.69 L).
- Can I use universal coolant in my 2000 Acura Integra?
- It is strongly recommended to use coolant that meets the 50/50 mixture of HONDA Antifreeze/Coolant and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2000 Acura Integra?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.