Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Audi A6Coolant Type & Capacity
OEM spec from the factory service manual for the Base, 4D Sedan variant.
Quick Answer
Coolant Type
50/50 mixture of Ethylene Glycol Antifreeze and water
Capacity
11.60 QTS.
10.97 L
Variant
Base, 4D Sedan
Note: Use Phosphate-free Antifreeze.
Source: Factory service manual — 1996 Audi A6 Base, 4D Sedan. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 1996 Audi A6 take?
- The 1996 Audi A6 requires 50/50 mixture of Ethylene Glycol Antifreeze and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 4D Sedan configuration.
- How much coolant does a 1996 Audi A6 hold?
- The 1996 Audi A6 cooling system capacity is 11.60 QTS. (10.97 L).
- Can I use universal coolant in my 1996 Audi A6?
- It is strongly recommended to use coolant that meets the 50/50 mixture of Ethylene Glycol Antifreeze and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1996 Audi A6?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.