Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Ford EconolineOil Type & Capacity
OEM spec from the factory service manual for the E150, 4.9 Y, C6 variant.
Quick Answer
Oil Type
$SAE 5W-20 Premium Synthetic Blend Motor Oil. Add .5 qt if equipped with oil cooler.
Capacity (w/ Filter)
5.00 QTS.
4.73 L
Variant
E150, 4.9 Y, C6
Note: Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9.
This vehicle's factory manual
1995 Ford Econoline: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 1995 Ford Econoline
Frequently Asked Questions
- What type of oil does a 1995 Ford Econoline take?
- The 1995 Ford Econoline requires SAE 5W-20 Premium Synthetic Blend Motor Oil. Add .5 qt if equipped with oil cooler.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the E150, 4.9 Y, C6 configuration.
- How much oil does a 1995 Ford Econoline need?
- The 1995 Ford Econoline takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1995 Ford Econoline?
- Yes — synthetic oil that meets the SAE 5W-20 Premium Synthetic Blend Motor Oil. Add .5 qt if equipped with oil cooler. specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1995 Ford Econoline?
- Using oil that does not meet the SAE 5W-20 Premium Synthetic Blend Motor Oil. Add .5 qt if equipped with oil cooler. specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.