Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Geo TrackerCoolant Type & Capacity
OEM spec from the factory service manual for the Base, 4WD, Automatic variant.
Quick Answer
Coolant Type
50/50 mixture of Ethylene Glycol Base Antifreeze and water
Capacity
5.50 QTS.
5.2 L
Variant
Base, 4WD, Automatic
Note: GM Specification 1825-M.
Source: Factory service manual — 1993 Geo Tracker Base, 4WD, Automatic. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 1993 Geo Tracker take?
- The 1993 Geo Tracker requires 50/50 mixture of Ethylene Glycol Base Antifreeze and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 4WD, Automatic configuration.
- How much coolant does a 1993 Geo Tracker hold?
- The 1993 Geo Tracker cooling system capacity is 5.50 QTS. (5.2 L).
- Can I use universal coolant in my 1993 Geo Tracker?
- It is strongly recommended to use coolant that meets the 50/50 mixture of Ethylene Glycol Base Antifreeze and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1993 Geo Tracker?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.